Conductivity Meters
Hach Company Conduct Sens-Cons 5.0-SS-T
Conductivity Sensor-Cell Constant 5 0-Stainless Steel-T-20 ft CableNominal Cell Constant (K) 5 0 Extended Sensor Body with 316 Stainless Steel Outer Electrode (requires 316 SS Ball Valve Assembly MH114M3C) 6m (20 ft) Analog Cable Titanium Electrode
Azzota Corp Portable cond meter CON-0.1 AT
Potable Conductivity Meter with ATC and CON-0 1 electrode
Hach Company Contact Conduct Alg Sens-Low
Contacting Conductivity Sensor for Low Conductivity-K 0 05 with 1/2in Stainless Steel Compression FittingNominal Cell Constant (K) 0 05 1/2 inch NPT 316 Stainless Steel Compression Fitting 6m (20ft) Analog Cable Titanium Electrode
Cole-Parmer Megger 659600E Cable Height Meter, 75ft. Max.
These cable height meters utilize ultrasonic sound to determine the height of up to six overhead cables and wires. The instruments are designed to address specific measuring requirements on cables up to 75 feed (23 m). The BD121136 and BD121138 are designed primarily for power cable applications, while the BD121130 is designed for telecommunication applications.
The Cable Height Meters are capable of measuring the lowest or highest cables (provided it is within range). Additionally the spacing between the next five cables, by selection of "Bottom UP" mode or "Top Down" mode, can be displayed. Applications include measuring cable heights of: telephone lines, distribution lines, transmission lines, cable television installers and contractors), street lights, SAG (lowest point to grou
Hach Company Contact Conduct Alg Sens-Con 5
Contacting-Conductivity Analog Sensor-Cell Constant 5 0-3/4 inch NPT Stainless Steel Compression FittingNominal Cell Constant (K) 5 0 3/4 inch NPT 316 Stainless Steel Compression Fitting 6m (20 ft) Analog Cable Titanium Electrode
Hach Company Conduct Sens-PP-Con 0.5-SS-T
Conductivity Sensor-Cell Constant 0 5-Stainless Steel-T-PP HDNominal Cell Constant (K) 0 5 Extended Sensor Body with 316 Stainless Steel Outer Electrode (requires 316 SS Ball Valve Assembly MH114M3C) Polypropylene Junction Box with 3/4in NPT Conduit Connection - Requires 1W1100 Interconnect Cable Titanium Electrode
Cole-Parmer Jenway 4520 Conductivity Meter with Cell and GLP; 120 V
Get accurate readings quickly with this meter. Always measure at the best resolution with automatic standard recognition. Easily calibrate with either standard solution or known cell constant.
Cole-Parmer Myron L TP1 TechPro II conductivity/TDS meter
The TechPro II series of meters provide conductivity/TDS measurements for applications such as boilers and cooling towers, reverse osmosis, pools and spas, pulp and paper, and many other industries. The meters require only a 5-mL sample for conductivity measurements. Both the temperature-compensated measurement of interest and the sample temperature is displayed on the four-digit LCD. The meters have autoranging function for greater resolution of your conductivity measurements between 0 and 9999 µS or 10 to 20.00 mS.